WinTech Group Products
WinTech 10, for-PURE is seamless, welded, welded and drawn and/or mechanically polished, then electropolished to a 7 u-in Ra average, 10 u-in Ra max ID for the Pharmaceutical, Biotechnology, Semiconductor and other ultra high purity processes.
WinTech 15, for-BPE is seamless, welded, welded and drawn and/or mechanically polished, then electropolished to a 10 u-in Ra average, 15 u-in Ra max ID for the pharmaceutical, biotechnology, semiconductor and other high purity processes produced by a certified ASME-BPE manufacturer and/or compliant with ASME-BPE SF4.
WinTech 20, for-BPE is seamless or welded polished to 15 µ-in Ra average, 20 µ-in Ra max ID for Pharmaceutical, Biotechnology, Semiconductor and other high purity sanitary processes produced by a certified ASME-BPE manufacturer and/or compliant with ASME-BPE SF1.
WinTech 40 is BA (bright annealed) seamless or welded and is as drawn and/or mechanically polished to 40µ-in Ra ID for clean process lines.
WinTech BA for-BPE is bright annealed commercial seamless or welded tubing for instrumentation, process lines, and steam applications in compliance with ASME-BPE SF0.
WinTech, for-VAC is produced for use in Vacuum systems.
WinTech Group tubes are available in seamless and/or welded sizes 1/16” through 12″.
Materials: Sanitary tubing is available in alloys 304/304L and 316/316L. All 316/316L seamless tubing is supplied with a sulfur content of .005-.012% and welded tubing is supplied with a sulfur content of .005-.017% as specified in ASTM A270, Supp. S2 ASME-BPE. Available in A249, A269 and A270
Marking: Bright annealed tubing is line-stenciled with OD, wall, ASTM specification, manufacturer, grade, heat number, or per ASME-BPE.
Mechanical Tests: To ensure the highest quality in all of our sanitary products, WinTech meets or exceeds the requirements of ASTM and/or ASME A213 EAW, A269 and/or A270 S2, per order.
Surface Finish: All ID surface finishes are u-in Ra maximum, with an optional 32 u-in OD maximum measured per ASME/ANSI B46.1.
Cleaning: As an option any WinTech product can be TC&C (thermocouple cleaned and capped) or CFOS (cleaned for oxygen service). Class 10 cleanroom processing and packaging is available for final cleaning.
Inspection: 100% of all WinTech tubing shall be inspected for conformance to most recent ASME BPE or SEMI acceptance criteria for interior surface finishes of tubing.
Winter Technologies will supply the following reports and certificates of analysis with all
WinTech orders when applicable:
• Material Test Reports
• Certificate of Conformance
• SEM, ESCA, AUGER when required
Protective Packaging: Packaging is provided to protect the OD, for polished material, as well as the ID of the products. Protective caps and bagging is available to ensure the products arrive at your site in the same excellent condition they left our facility. For WinTech 10 Polyamide Nylon film is covered then capped.
Tubing can be ordered with ends faced ready for orbital welding.